Analysis of the reason why the fine sulfur pump cannot transport liquid sulfur during operation Sulfur is a light yellow crystal with a melting point of 112.8-119.3℃, and its physical properties are relatively special, and its viscosity changes with the change of temperature
2024-03-04- Analysis of the reasons for the production of systematic sublimation sulfur
We need to understand the mechanism of sublimed sulfur production before analyzing the causes, in order to understand this problem more clearly, so as to better solve it.
2024-02-22 - Application of flue gas sealed sampler in sulphuric acid plant
YunNan Phosphate HaiKou CO.,LTD. (YPH), a China-Israel joint venture, was established in October 2015 with a registered capital of RMB 2.3 billion.
2024-02-02 
Effect of sulfur spray gun on long cycle operation of device The sulfogun is the only channel for liquid sulfur to enter the sulfur burning furnace, and its health status is directly related to the continuous operation of the device.
2024-01-26- The phenomenon and cause analysis of liquid flooding in absorber
In the production process of sulfuric acid plant, three absorption towers will have liquid flooding problems due to the change of process parameters. In the initial stage of the fl
2024-01-19 - Measurement principle of conductivity sensor of high temperature acid concentration instrument
The waste heat recovery system of the sulfuric acid plant uses concentrated sulfuric acid in the production of sulfuric acid to absorb the heat released by SO3 to heat
2024-01-11
- News
Focus on sulfuric acid industry, to solve the industry measurement problems